Anchor Point Installations

Roof Anchors for Sydney Region and Surroundings

Supplied, Installed & Certified

Application

Anchor points are usually used for Roof edge protection (Fall Protection/Prevention)  or Abseiling (Rope Access) (Rope Access) or both.

 

If you need anchor points for a job in Sydney or New South Wales, it is very important to decide your application as anchor points are not all the same. We at Technical Safety can help you in this regard. We provide proposals with plan mark-ups, free consultations and site visits. Call us at: 1300 954 649

Anchor Points Range

Concrete Mount AnchorsAP 125AXPLORA

Concrete Anchor Point Installation Sydney
Concrete Anchor Point
Metal Sheet RoofsAP 130A3SIXTY

Anchor Point Installation Metal Sheet
Metal Sheet Roof Anchor Point Installation
Raised Roofs (Pebbles)AP118XPLORA

Anchor Point Installation
Raised Anchor Point

 

  • For concrete mount anchors we recommend the XPLORA AP 125A
  • For metal sheet roofs we recommend the 3SIXTY AP 130A
  • For roofs with pebbles we recommend the raised XPLORA AP118

Working at heights

Working at heights is a high-risk activity and Australia’s leading cause of death and serious injury. In the period 2003-2015 workers were killed from a fall from a height accounted to 11% of all workers killed in that period with a total of 359 workers. [1] The construction industry accounted for 37% of falls-related fatalities. [1]

Australian Standards and Load Rating

Our range of anchor points complies with Australian Standard AS/NZS/ 1891.4.2009, AS/NZS/5532.2013 & AS/NZS 4488. Anchor points are usually rated at 15 kN

Prices

Cost of anchor points usually is based on application, roof pitch, roof type & location of the job. Prices ranges from $150 up to $300 per anchor. Typical roofs need around 8-50 anchors depending on the roof size.

Certification

Anchor point certification / re-certification includes a detailed inspection of your systems by one of our qualified Height Safety Technician here at Technical Safety. We can inspect these systems on a 6-12 monthly basis as required by Australian Standards. Certification usually involves Load testing anchors, visually inspecting fixings, checking for water proofing and sealing.

We provide proposals with plan mark-ups, free consultations and site visits. Call us at: 1300 954 649

Sources

[1] https://www.safeworkaustralia.gov.au/heights

Technical-Safety